精品国产乱码久久久久久婷婷,伊人久久无码中文字幕,久久久久亚洲AV成人网人人网站,色八区人妻在线视频

Industry information The functions of lubrication oil tank injector 1 # and injector 2 # for steam turbines源頭廠家規(guī)格參數(shù)
Your location : Home > News > Industry information

The functions of lubrication oil tank injector 1 # and injector 2 # for steam turbines

time:2023-11-25 22:53:50Views:

The oil injectors produced by Lianyungang Lingdong Electromechanical Equipment Co., Ltd. generally consist of nozzle filters, expansion pipes, inlet pipes, etc., and are installed on the main oil pump. When the pressure oil is sprayed out at high speed through the nozzle, a vacuum is formed at the nozzle. By utilizing the suction effect of the free jet, the oil in the tank is brought into the diffusion tube for deceleration and pressure increase, and then discharged at a certain pressure. Enable the main oil pump to have a certain pressure and improve the reliability of its operation.



1-241110194J12W.webp

1-241110194J12W.webp

1-241110194J12W.webp

The functions of lubrication oil tank injector 1 # and injector 2 # for steam turbines:


-The general unit is equipped with two oil injectors, which are divided into an oil injector and a second oil injector, also known as an oil injector. The second oil injector is installed below the liquid level in the lubricating oil tank, and when the unit is put into operation at or near the rated speed. The oil injector consists of a nozzle, a mixing chamber, a diffusion tube, etc. After the pressure oil from the main oil pump passes through the nozzle, the oil velocity increases and forms a low-pressure zone in the chamber. The oil in the tank is pumped into the injector chamber, and then it is carried by a high-speed oil belt into the diffuser throat. The velocity decreases in the diffuser and is converted into pressure energy. Then, through an oil cooler, it is sent through a pipe to the bearing manifold and the main oil pump suction port. Diffusion - equipped with a rocker check valve at the back to prevent oil from flowing back from the system. A check plate is installed on the surface of the oil tank in the chamber to prevent backflow into the oil tank during the operation of the bearing oil pump. To prevent foreign objects from entering the oil injector, a detachable perforated steel plate filter screen is installed on the oil suction side of the injector. The oil injector is one of the essential equipment in the lubricating oil system of the steam turbine generator set. In the lubricating oil system of the steam turbine generator set, the oil injector equipment can be divided into oil supply injectors and lubricating oil supply injectors according to its working purpose. Its working medium is L-TSA 32 turbine oil, with a working oil temperature of 45 ℃~65 ℃. When the unit reaches or approaches the rated speed, it is put into operation.


1. Fuel injector:


During normal operation of the unit, sufficient oil is provided to the main oil pump, with a portion of the pressure oil at the outlet of the main oil pump as its power oil.


2. Lubricating oil injector:


During the normal operation of the unit, lubricating oil is provided to the bearings of the steam turbine generator set, and its power oil is still part of the outlet of the main oil pump.


The installation of oil injectors requires attention to the following two aspects:


3. Assembly and installation:


The installation of the oil injector and its impact on energy are different. When installing the nozzle of the oil injector and lubricating oil injector, the nozzle bracket and inlet pipe flange must be tightened to ensure high-pressure oil leakage. The flatness and smoothness of all adhesive surfaces should be -.


4. Maintenance and upkeep:


When the oil injector is transported to the site after leaving the factory, if it is not immediately put into use, it needs to be repainted and sealed for protection. If it cannot be installed or filled with oil within two months of arriving at the site, it should be installed. The oil injector must be disassembled and inspected to remove rust and dirt. During the overhaul of the unit, the oil injector needs to be disassembled and inspected, and the nozzle should not be inspected. The surface roughness of the spray hole should reach the surface roughness (arithmetic mean of the contour deviation within the sampling length) R α The upper limit value is 3.2 microns. If there are any scratches or indentations, they need to be replaced.


產(chǎn)品動態(tài)

The functions of lubrication oil tank injector 1 # and injector 2 # for steam turbines源頭廠家Copyright ? 2012-2023 Lianyungang Lingdong Electromechanical Equipment Co., Ltd all rights reserved

Tel

0518-85370171

欧美一级免费黄片| 如东县| 热久久国产| 国产激情久久久| 久久影视| 久久九九99| 久久久久久91香蕉国产| av加勒比| 欧美三级韩国三级日本一级| 天堂√中文最新版在线| 一本色道久久88加勒比| 朋友的妈妈在线播放 | 伊人久久网站| 久久久久久久久国产| 久久精品免费一区二区喷潮| 亚洲精品无码少妇30P| 欧美精品v国产精品v日韩精品| 久久综合狠狠色综合伊人 | 最近中文字幕mv在线直播| 国产裸体美女永久免费无遮挡| 欧美伊香蕉久久综合网99| 亚洲国产精品毛片AV不卡在线| 久久婷婷久久一区二区三区| VR成人片在线播放网站| 国产精品无码AV片在线观看播放| 日韩内射激情视频在线播放免费| 霍邱县| 哈尔滨市| 麻豆映画传媒新剧免费观看| 国产精品无码不卡一区二区三区| 海盐县| 国产在线精品一区二区高清不卡| 97资源共享在线视频| 亚洲狠狠婷婷综合久久久久| 国产精品自在拍首页视频| 中文字幕AV无码免费一区| 片多多免费观看高清电影| 人妻一本久道久久综合久久鬼色| 亚洲av无码一区二区三区天堂| 99久久精品国产一区二区蜜芽| 亚洲WWW永久成人网站|