精品国产乱码久久久久久婷婷,伊人久久无码中文字幕,久久久久亚洲AV成人网人人网站,色八区人妻在线视频

Cooler typeSteam -seal cooler源頭廠家規格參數
Your location : Home > Product > Cooler type
Steam -seal cooler
Steam -seal cooler
Steam -seal cooler
Steam -seal cooler

Steam -seal cooler

The role of a steam -seal cooler is to make the tram from the steam turbine slightly negative pressure, so that the auto continuously enters the auto seal cooler through the auto pipeline and condenses it into water for the boiler to use it.
Online inquiry
上一產品 : Tubular oil cooler
下一產品 : Sampling cooler
  • Content details

Introduction to the Cooling Cooling Cooling:


The role of a steam-seal cooler is to make the turbine-rear steam seal-trains slightly negative pressure, and the-steam pipes continue to enter the auto seal cooler through-steam pipelines and condense it into water for reuse of the boiler.


The knot of the auto seal cooler-and material:

 

The auto seal cooler is a surface heat exchanger, a horizontal knot-, consisting of water chamber and shell, shell material: carbon steel or stainless steel, pipe materials: stainless steel pipe, copper pipe, etc.


Auto seal cooler knot-:


The water exchanger water side of the auto seal cooler uses four process knots-, its cooling water-enter the water room from the water inlet of the water seal cooler, and then flow into the tube of the shell-when the cooling water is in the heat exchange pipe When flowing, heat exchange with steam in the shell (steam side). Cooling water absorbs a large amount of steam condensation heat, rising water temperature,-later enter the export water room, and overflows the auto seal cooling through cooling water exports. Instrument. The steam from the turbine-rear axis seal, through-auto pipeline, enters the inside of the shell from the auto-seal-seal-seal-entrance. The diversion of the steam flowing through the interval between the interval is constantly flowing between the heat exchange pipes of the tube, and the heat exchange is performed. When most of the steam passes through the outer wall of the heat exchange pipe, it releases a large amount of heat and condenses into water. Excessary from the hydrophobic port and enter the hydrophobic pipeline. Because-steam-some of the air that cannot be condensed, in order to make-steam continuously pass-auto pipelines and enter the auto seal cooler, you need to pull out the gas, and through the steam injection, the air and residual steam are discharged to the atmosphere.


Step installation steps for auto seal cooler:


1. -Can the base of the vapor sealing the cooler is qualified and clean up the foundation surface.

2. Hall out of the auto seal cooler on the basis, adjust the level and elevation position.

3.-Check the location of the cooling device and whether the interface position is correct.

4. Fixed equipment (secondary pouring).

5. Connect the pipeline and electricity-.


Precautions for the installation of auto seal cooler:


1. The equipment should be placed on the flat venue.

2. When hanging, the second-sided steel wire rope is on the outside of the equipment support, and the force is uniform.

3. Equipment should be avoided-the effects of external or external torque.

4. When connecting the pipeline, consider the displacement of the device and the displacement of the pipeline. All interfaces (including valves, instruments, instruments, etc.) should be cleaned up. Disassembly seal (including sundries such as steel plates, cardboards, etc.) should be removed to prevent the pipe port from blocking the mouth.

5. Electric-parameter requirements.

6. Start operation-, the whole system-to be cleaned to prevent the blockage and (or) damage of certain equipment, the pipeline-should consider the use of filters.

7. All takeover-the cover should be uniform-seal to prevent leakage.

8. Tie-conduct-seal-test and eliminate leakage-.

9. Rehabilitation, installation instrument, instrument.


Starting and shutdown:


The operation of the auto seal cooler should pay attention to the following basic steps:

1. British-the exhaust pipe is unblocked-block.

2. The condensate water and hydrophobic pipeline of the cooler should be unblocked.

3. Turn on the cooling water into/outlet valve so that the cooling water circulates in the cooler.

4. Open the auto seal cooler into the steam valve and start the injection.

5. In order to protect the cooling tube of the cooling cooler, the pump should be parked in the auto seal cooler















汽封加熱器型號
QF-8
QF-8/10
QF-10/12
QF-10/12
QF-14
QF-17
QF-25
QF-30
QF-45
QF-65
QF-70
加熱面積m2
8
18
22
30
14
17
25
30
45
65
70
水測壓力MPa
0.392
0.392
0.392
0.392
0.588
1.372
1.47
0.98
2.45
1.57
2.45
汽測壓力MPa
0.49
0.588
1.176
1.57
0.093
0.093
0.093
0.095
0.088
0.073
0.093
管徑外/內(mm)
15/13
15/13
15/13
16/13
15/13
16/14
19/17
15/13
19/17
16/14
19/17
設備-量t
0.43
0.52
0.67
0.84
0.5
0.8
1.2
0.71
1.6
2.0
2.1


產品動態

Steam -seal cooler源頭廠家Copyright ? 2012-2023 Lianyungang Lingdong Electromechanical Equipment Co., Ltd all rights reserved

Tel

0518-85370171

99久久精品午夜一区二区| 伊人久久大香线蕉成人| 成人黄色一级片| 亚洲成人国产| 天天狠天天透天天伊人| 欧洲美熟女乱av在| 日韩亚洲av最新在线观看| 超碰人人插| 麻豆啪啪啪| 久久精品中文骚妇内射| 久久久久国色A∨免费看| 少妇无码AV无码专区线| 四虎影视永久在线观看精品| 另类激情文学人妻无码免费| 九九热精品视频| 国产中文字幕一区二区| 精品国产99久久久久久| 99噜噜噜在线播放| 夜夜嗨AV一二三区无码| 日产亚洲一区二区三区| 日韩人妻无码系列专区| 久久精品国产亚洲AV麻豆小说| 精品内射| 夜夜嗨av色一区二区不卡| 少妇白浆| 好大好湿硬顶到了的好爽视频| 99久久久国产精品免费蜜臀| 亚洲日韩电影欧美色图叼中文字幕| 无码人妻精品中文字幕不卡 | 中文字幕熟女av一区二区| 人妻少妇精品久久久久久| 久久精品国产亚洲AV高清色欲| 国产精品特级毛片一区二区三区 | 麻豆aⅴ精品无码一区二区| 黑人女性猛交xxxxxⅹxx| www.天堂av| 伊是香蕉大人| 日韩av高清在线| 一本高清热品品| 欧美交受高潮1| 久久久久久久久久久久|